Suiting the various IS standards and growing application in the fields of agricultural institutions, research laboratories, various industries and medical institutions, are the classic make universal water bath.

Features : Temperature Range 5°C above ambient to 85°C.

We are engaged in manufacturing and exporting of Bacteriological Incubators, which are developed to conduct life cycle testing, shelf life studies and general incubation. These Bacteriological Incubators have a temperature range adjustable from 5.0 Deg C above ambient to 60.0 Deg C with micro controller based temperature indicator cum controller and these are used for seed testing and biological studies. Our range is a non-refrigerated version of BOD incubator and is designed for close control of incubation.Cabinet Construction and Refrigeration System:

The hot plates we manufacture are appropriate for laboratory heating and sample drying and have a pure ceramic material top that endow with both impact strength and chemical resistance. These plates have reflective white color that increases the visibility and the body which is constructed of rugged aluminum for stability and durability. The variable heat control provides up to 375 W of even heat and is approved by CSA. These are available in 115 V, 50/60 Hz.

We offer a wide range of burn in chamber that are used in various industries such as rubber, automobile, electronic and glass. These burn in chamber are offered with various safety devices such as MCB and audio visual indication.

In addition, following systems are provided in our range of burn in chamber are as follows:

• PID Controller
• Inspection Window with two Pane Glass & Lamp
• Port Holes of 25 mm Diameter for Specimen Wiring
• Chamber on Delay Timer
• Specimen Trays

Technical Specifications:

• Work Space: 0.5 x 0.5 x 0.5 meter to 1 x 1 x 1 meter
• Temp Range: Ambient 10 to 80°C
• Temp. Tolerance: ± 1°C
• Temp. Control: By Digital Temp. Controller
• Temp Sensor: PT 100
• Power: 230/440 VAC

Application :

Specially used for laboratory evaluation of soaps, detergents, dyestuffs, surfactants, cleaners for textiles & other materials.

Fabrication :

Heavy angular structure with crca/ mis duly non-contaminent epoxy powder coated. It has a water bath with s. S tank, six 2-litre s. S beakers, six motor-driven s. S agitators.

Working :

It gives scaled reproductions of larger washer, this is a 6 place washing machine simulating the action of the agitator type washer.

Determination :

• Detergent value of soap, synthetic detergents, & other washing compounds.
• Washability of fabrics.
• Color fastness of textile materials.
• optimum temp. & rotary action cycle for a liquid phase until process.

Temp. Control :

Microprocessor based pid temp. Controller for water bath, agitator speed controller, automatic timer to set "wash" & rinse cycles.

Special care :

Suitable k. Va servo controlled voltage stabilizer is recommended in case of voltage fluctuations.

Application :

Autoclaves are specially designed for medical, clinical, bacteriological & research laboratories, Pharmaceuticals, Fertilizer plants, Breweries, Soft Drink mfrs etc.

Material of Construction :

Double walled thick gauge AISI Stainless Steel 304 quality, All contact parts of Stainless Steel, Top lid die pressed

Working :

Sterilization is the destruction, by physical or chemical agents, or living micro-organisms, such as bacteria or their viable spores. Commonly used methods of sterilization are, Dry heat, Boiling water, Free flowing steam, Pressurized steam, gas & filtration, pressurized steam sterilization employed in the Autoclave is the most universally used method of sterilization.

Double walled, electrically operated vertical autoclaves are sturdy, built exclusively for laboratory purpose. Each Autoclave is rigidly tested & equipped with long lasting moulded Neoprene / Silicon gasket.

Optional :

It can also be provided with Microprocessor based controller, Pressure switch & 24hrs timer with PC interface, automatic purging of steam with Solenoid valve, Low water level cut off system, Data logger & IQ, OQ, PQ & DQ Protocols on request.

• Pressure Range : 0-20 P.S.I., 0-30 P.S.I. Electrically Heated
• Lid with easy paddle lifting arrangement
• Safety through Automatic safety valve.
• Adjusted at 1 kg / Cm2 (15 P.S.I.)
• Immersion Heaters.
• Rugged in Construction.
• Power : 220/230 V 50 Cy. Single Phase A.C.

Technical Specification

Model	Internal Dimensions
AA-A	30 X 50 cms
AA-B	35 X 55 cms
AA-C	45 X 75 cms
AA-D	55 X 75 cms
AA-E	55 X 90 cms

Our range of dryers consists of contactor assembly, On & Off switch,Digital controller with indicating, neon lamps, operating push buttons are incorporated in the control Box.Damper jL^L^LH.

 

• Adjustable exhaust damper with an arrangement for prefiltration
• In the air inlet. Optional ^^^^H
• Trolleys & Trays supplied as per requirement. GMP models /
• Complete S. S unit. Microprocessor based temp. Controll with
• Printer interface (PC interface with RS 232 / RS485 for
• Networking of controllers. Data logger, Profile controller for
• Ramp / Soak cyclic applications.
• Safety Features :
• Built-in temp, deviation audio visual alarm. Safety thermostat
• for over shoot temp, cut off circuit to cut off the whole systems
• in case of malfunction, (only applicable to Microprocessor based
• models).
• Validation :
• IQ, OQ, PQ, & DQ Protocols with calibration & complete
• documentation with test certificates.
• Steam Heated Models :
• These are provided with finned tubular steam coils instead of /in
• addition to heaters, along with solenoid valve.

Muffle furnace are specially designed to suit the various IS & A ST M Standards, & is applied in the growing fields of medical,research, agricultural, industrial, metal treatment, Ash Determination & wool Industries.

Fabrication : 

 

• Fabricated on heavy M. S plates with heavy double walled door
• with ceramic wool used as insulation. Inner made of silimenite
• muffle, External made of CRCA / MS duly epoxy powder coated.
• Door insulation of HFK bricks.

Heating Element

• Is provided byA-1 Kanthal heaters.
• Temp. Control :
• Digital temp, controller with Thermocouple CR / AL.

Optional :

Microprocessor based PID controller with Timer. Electronic solid state fuses. Ventury ejector at the back as Air circulation as per A. S. T M standards. Energy regulator or blind regulator is installed as safety device.

TECHNICAL SPECIFICATION

• Model
• Internal Dimension
• External Dimension
• Cap. (Watts)
• Power
• Consumption

Net Weight

• MF-A
• 23x10x10 cms
• 45 x 35 x 35 cms
• 1800
• 8 amps
• 35 kg

MF-B

• 25x13x13 cms
• 47 x 38 x 38 cms
• 2250
• 10 amps
• 45 kg

MF-C

• 30 x 15 x 15 cms
• 53x41 x41 cms
• 3200
• 14 amps
• 55 kg

MF-D

• 45 x 23 x 23 cms
• 69 x 50 x 50 cms
• 6000
• 26 amps
• 85 kg

Electrical requirements 230V AC, 50 H2.

Due to continuos development & Improvements tn design, we reserve the right to change the specification without notice.

Application :

Specially Used for Laboratory evaluation of Soaps, detergents, dyestuffs, surfactants, cleaners for textiles & other materials.

Fabrication :

Heavy angular structure with CRCA/ MIS duly non-contaminent epoxy Powder coated. It has a water bath with S. S tank, Six 2- litre S. S beakers, six motor-driven S. S agitators.

Working :

It gives scaled reproductions of larger washer, This is a 6 place 25 TERG-O-TOMETER washing machine simulating the action of the agitator type washer.

Determination :
 
Detergent value of soap, synthetic detergents, & other washing compounds. Washability of fabrics.Colour fastness of textile materials. Optimum temp. & rotary action cycle for a liquid phase until process.

Temp. Control :

• Microprocessor based PID temp. controller for water bath,
• agitator speed controller, automatic timer to set "wash" & rinse
• cycles.

Special Care :

• Suitable K.VA Servo Controlled Voltage Stabilizer is
• recommended in case of voltage fluctuations.